对《中图法》(第四版)类目注释的系统认识

本文从语言特点、编排体例及内容特点出发,对《中图法》(第四版)类目注释进行了系统的认识,并就此提出了自己的一些看法。     

酥梨采后灰霉病生防菌株的鉴定及抑菌作用

以微生物拮抗病原菌是防治病害安全高效的可行手段。通过对果实表面微生物进行筛选鉴定,以期得到一株可以有效抑制灰霉病的生物防治菌株。对拮抗菌株H-1进行形态学特征、生理生化特性分析,结合16S rDNA序列分析和gyrB 基因序列分析构建系统发育树;采用平板对峙法结合果实伤口试验考察拮抗菌H-1在体外及梨果表面的抑菌作用。结果表明：经鉴定H-I菌株为贝莱斯芽孢杆菌（Bacillus velezensis）;B. velezensis H-1在体外条件下可显著抑制灰葡萄孢霉（Botrytis cinerea）、细极链格孢（Alternaria tenuissima）和串珠镰孢菌（Fusarium verticillioides）的菌丝生长,其中对灰葡萄孢霉菌丝的抑制作用最强;果实伤口试验表明,1×1011 CFU/mL的B. velezensis H-1可完全抑制梨果表面灰霉菌生长。由此可见,B. velezensis H-1可以有效抑制梨果采后灰霉病的发生。     

灰色灾变理论在宁南山区干旱气候预测中的应用

在分析宁南山区干旱气候特征及其对农业生产影响的基础上 ,借助灰色灾变理论分别建立了春旱、夏旱、秋旱、春夏连旱、夏秋连旱、全年旱等六种干旱类型的 GM( 1 ,1 )预测模型 ,并对 2 0 0 0～ 2 0 2 0年的干旱气候做出预测。经对 2 0 0 0年和 2 0 0 1年预测结果验证 ,吻合性良好。此外 ,提出了宁南山区抗旱防旱的综合农业措施。研究结果可对广大旱区抗旱减灾 ,促进农业生产发展提供科学指导。     

新亚欧大陆桥新疆段受损区段的灰色预测

在对新亚欧大陆桥新疆段受损区段、受损长度及受损频率和受损密度详尽分析的基础上，揭示了陆桥新疆段受损区段的时空分布规律。并依据灾害的时序分布特征，运用灰色原理和方法，根据受损区段数确立阈值和相应的年份序列，分别建立GM（1，1）模型，求出年份序列的序号响应式，并对实际值和理论预测结果进行了拟合检验，模型群的原点误差范围为0.198-1.314之间，平均误差为0.823-1.917，并同时预测了陆桥新疆段2001－2005年间可能的受损区段数。     

Further suppression of<Emphasis Type="Italic">Botrytis cinerea</Emphasis> disease in cucumber seedlings by chitosan-copper complex as compared with chitosan alone

Chitosan-copper complex compared with chitosan alone enhanced suppression ofBotrytis cinerea rot development on four-true-leaf cucumber seedlings in controlled growth chambers. This paper constitutes the first report of such enhancement. The optimal concentrations for the most effective suppression ofBotrytis development were 0.2 gl ⁻¹ chitosan and 1.6 mmole copper. After 12 days’ incubation, marked and significantly better disease suppression was obtained with chitosan-copper complex (75% suppression) than with chitosan alone. The chitosan-copper complex could be a very promising decay control agent for use in both conventional and organic agriculture. http://www.phytoparasitica.org posting Dec. 18, 2002.     

温湿度调控对番茄灰霉病菌产生的细胞壁降解酶的影响

 番茄灰霉病菌在致病过程中能够产生4种细胞壁降解酶,以PMG酶活性最高,其次是β-葡萄糖苷酶和PG酶,Cx最少。灰霉病菌在不同温度下侵染番茄叶片时产生的致病酶活性不同,4种酶在20℃时表现了最高的活性,15℃次之,当温度达到25℃时,各种酶的活性都急剧下降,随着温度的再升高,酶活更低。随着湿度的增高,病菌产生的细胞壁降解酶的活性也增加,当相对湿度达到90%以上时,4种酶的活性也达到最高。温湿度对番茄灰霉病菌产生细胞壁降解酶的影响趋势,与其对发病的影响趋势是一致的。     

Resistance to Botrytis cinerea in Solanum lycopersicoides is Dominant in Hybrids with Tomato, and Involves induced Hyphal Death

Botrytis cinerea causes gray mold disease and affects hundreds of plant species, including tomato (Lycopersicon esculentum). The wild nightshade, Solanum lycopersicoides, is cross compatible with tomato and is more resistant to B. cinerea, thus representing a potential source for crop improvement. Tests involving droplet inoculation of detached leaves and spray inoculation of entire seedlings demonstrated that resistance to B. cinerea varies among S. lycopersicoides accessions, with S. lycopersicoides LA2951 being the most resistant accession tested. Expression of resistance in the intergeneric hybrid (L. esculentum cv. 'VF36' × S. lycopersicoides LA2951) suggested that resistance is at least partially dominant in tomato. A green fluorescent protein-tagged B. cinerea strain was used for confocal microscopic comparison of infection in leaves of S. lycopersicoides and tomato. Even though S. lycopersicoides supported spore germination, there was evidence for hyphal lysis and death 3 days after inoculation, at a time when lesions were expanding on susceptible tomato plants. The reduced frequency of B. cinerea lesion spread on S. lycopersicoides explains why this fungus produced fewer spores in this wild nightshade than in tomato.     

覆膜滴灌玉米产量和农艺性状相关性分析

为明确在覆膜滴灌条件下玉米品系(种)主要农艺性状与产量的关系,应用DPS软件对15个玉米杂交品系(种)的主要农艺性状和产量性状进行相关性、灰色关联度等分析,结果表明:籽粒重、穗重、产量的变异系数较大;玉米产量与生育期、籽粒水分含量、穗重、籽粒重呈显著正相关关系;聚类分析可将参试的15个品系(种)划分为3类,第Ⅲ类表现良好,值得进行推广种植。灰色关联度分析表明,玉米籽粒重、穗重、生育期、籽粒水分含量等性状是影响玉米产量的主导因素,在玉米高产育种中,应以其为主攻目标,提高玉米后代的有效选择,加速高产育种进程。     

Transient heat transfer characteristics of air-array-jet impingement with different nozzle arrangements on high-tempera-ture flat plate in small jet-to-plate distance

Numerical studies on transient heat transfer characteristics of air-array-jet impingement with a small jet-to-plate distance and a large temperature difference between nozzles and plate were presented.The dimensionless jet-to-plate distance(H/D)was 0.2,and non-dimensional nozzle-to-nozzle spacing(S/D)was 3,4,5 and 6,respectively.It is found that the quenching time is shortened at a constant total mass flow at air jet inlet m·(m·=218.21 kg/h),and the heat transfer uniformity is deterio-rated as S/D increases.However,the adding reversed-flow nozzles can shorten the quenching time of the glass plate considerably with a modest change in the heat transfer uniformity.The results at variable m·are the same as those at a fixed m·.Furthermore,the parity and arrangement of nozzles are also discussed,It is found that an odd number of nozzles is more beneficial for transient heat transfer.Based on these results,an appropriate proposal for ultra-thin glass tempering process is presented.     

智能喷水灭火装置不同布置方式技术分析

在考虑喷水强度和喷水均匀性的基础上,文章针对智能喷水灭火装置的特性并综合国内一些工程实践经验,对智能喷水灭火装置的主要几种布置形式做出了技术分析比较,指出对于狭长型建筑物应采取单排布置形式,在多行列布置时宜被首选应用.